Paver Patio Installation Cost in Littleton, CO (2026 Guide)

Land Designs by Colton

Owners & Landscape Design-Build Team | Denver Metro, CO

Paver patio installation cost in Littleton runs $32 to $60 per square foot, materials and labor both included. A typical backyard project lands somewhere between $9,600 and $24,000 depending on size and material. 

If that’s the number you came here for, there it is. Everything below explains what pushes it toward one end of that range or the other, and what you should actually be asking any contractor you consider hiring.

Paver patio with outdoor seating, stone retaining wall, and decorative garden landscaping

What a Paver Patio Costs in Littleton

Most Littleton patios fall somewhere between $9,600 and $24,000, which corresponds to the 300 to 400 square foot range. That’s a useful orientation number, but what actually matters is the per-square-foot rate, which sits at $32 to $60 installed for most paver materials. 

Here’s a quick size breakdown to give you a starting point:

Patio Size Low Estimate High Estimate
100 sq ft $3,200 $6,000
200 sq ft $6,400 $12,000
300 sq ft $9,600 $18,000
400 sq ft $12,800 $24,000
500 sq ft $16,000 $30,000
These are project totals, not material-only estimates. They include base prep, drainage, and installation.

Cost by Paver Material

Natural flagstone patio installation surrounded by garden beds and residential landscaping
The biggest single factor in where you land on that $32 to $60 range is the material you choose.
Material Installed Cost per Sq Ft
Concrete pavers $32 – $50
Brick pavers $32 – $60
Natural stone (flagstone, etc.) $40 – $70+
Each one has a different look, weight, and character, and each performs a little differently in Colorado’s freeze-thaw cycles:

Our piece on concrete vs. pavers is worth a look if you’d like a more in-depth side-by-side comparison.

Cost by Patio Size

Size drives the total cost more than any other single factor. 

This is obvious in principle, but it also reveals something people sometimes don’t realize: the per-square-foot rate doesn’t decrease much as you go larger, because labor and base prep scale almost linearly with square footage. 

So if you’re debating between a 250 and a 350 square foot footprint, that decision has real weight. 

We find most Littleton homeowners end up in the 300 to 400 square foot range when they add seating areas and a connection point to the house. That said, the right size depends entirely on your yard layout and how you intend to use the space.

What Moves the Price in Littleton

Contractors installing concrete pavers with a mallet and level for a new outdoor patio
The per-square-foot tables give you a starting point. What turns an estimate into a real number is everything that happens before the first paver goes down.

Base Prep and Drainage, the Part People Never Price In

The base beneath a paver patio is what determines whether it stays level for twenty years or starts rocking and shifting within five. 

In Colorado, that matters more than most places, because the ground heaves with freeze-thaw cycles every winter. 

A proper base involves excavation, compacted gravel, bedding sand, and edge restraints, and in Littleton’s clay-heavy soils, drainage management often adds complexity. 

No reputable contractor buries this cost. It shows up in the quote. But if someone’s price looks suspiciously low, this is often the first thing that got skipped.

Slope, Steps, and Retaining Work

A flat, square yard is the cheapest site to work. Most Littleton properties aren’t that. 

Once a slope enters the picture, you’re dealing with cut-and-fill grading, and often retaining walls or step units to manage grade changes between levels. These are skilled masonry builds. 

Steps and walls can meaningfully shift the project cost because they take time, they require precision, and the material costs stack up. That said, they’re also some of the best work we do. 

A well-built retaining wall or a set of cleanly detailed steps can define an entire outdoor space.

Access to the Yard

If a crew can’t get equipment into your backyard easily, whether that means a tight gate, a side yard that’s too narrow, or landscaping that has to be worked around, labor time goes up. 

It’s not a huge factor for most properties, but worth mentioning during your site walk. 

For more information, check out our blog on common paver installation mistakes homeowners don’t anticipate.

Pricing FAQ

Most paver contractors in the Denver Metro collect a deposit at signing to cover materials, which are ordered specifically for your project. We confirm deposit terms during the proposal meeting so there are no surprises.
Our per-square-foot price covers excavation, base materials, bedding sand, the pavers themselves, edge restraints, joint sand, and cleanup. If your project includes walls, steps, or multi-level work, those are itemized separately in the proposal.
A few reasons. First, base depth varies: a contractor quoting a shallower base will always come in lower, and that difference shows up in how the patio performs five winters from now. Second, material quality varies significantly across the same product category. And third, overhead, crew quality, and warranty terms all factor in. When quotes are far apart, the honest question to ask is what got removed to hit that price.
Yes, and we’ve done it often. A common approach is building the base patio first, then adding a wall or step unit in a later season. The key is designing it all up front so the phases connect properly.

They do. The ROI on paver patio installation tends to run around 69%, which makes it one of the stronger outdoor investments for resale. More than the number, though, a well-built patio extends the usable living space of your home for years before you ever think about selling.

Ready to See What Your Yard Can Become?

Pricing a paver patio yourself gets you to a ballpark. Getting the right number, the one that accounts for your soil, your slope, your material preferences, and how you actually want to use the space, takes an eye on the ground. 

At Land Designs by Colton, owner Jonathan brings a background trained in landscape architecture from Mississippi State University and has been designing Littleton projects since we opened in 2011. 

Every paver patio installation we do comes with a 5-year warranty. We’re also ICPI-certified, which means the installation meets the industry’s published standards for base preparation and structural performance, not just our own word for it. 

When you’re ready to talk specifics, call us at (720) 580-3677 or message us here.

land designs by colton

Owners & Landscape Design-Build Team | Denver Metro, CO

Jonathan and Flavia Colton are the owners of Land Designs by Colton, a family-owned landscape design and build company serving the Denver metro area. Jonathan holds a Landscape Architecture degree from Mississippi State University and is the architect behind every custom design. Flavia handles client communication and project coordination, making them your only point of contact from first consultation to final walkthrough. The team specializes in hardscaping, paver patios, outdoor kitchens, xeriscaping, lighting, and full backyard transformations.